Veronica 90 sets a new benchmark for precision timing modules in industrial automation and test equipment. Engineers rely on this oscillator family for tight phase noise performance and robust frequency stability under variable conditions.
This overview outlines electrical limits, environmental ratings, and use cases that help teams integrate Veronica 90 into mission-critical clocking architectures.
| Parameter | Min | Typ | Max |
|---|---|---|---|
| Output Frequency | 80 MHz | 90 MHz | 100 MHz |
| Phase Noise @ 1 kHz Offset | -145 dBc/Hz | -155 dBc/Hz | -140 dBc/Hz |
| Frequency Stability @ 25..85 C | ±5 ppm | ±2 ppm | ±10 ppm |
| Supply Voltage | 1.1 V | 1.2 V | 1.35 V |
Veronica 90 Core Architecture
Voltage Controlled Oscillator Block
The core VCO loop in Veronica 90 delivers fast lock time and wide tuning range while maintaining low jitter. Temperature sensors and calibration non-volatile memory enable automated trimming during wafer sort to hit the 90 MHz center frequency with minimal process variation.
Output Divider and Buffer Stage
Programmable dividers allow fractional-N style ratios so users can derive lower frequencies without additional external circuitry. Output buffers support multiple drive strengths to match trace impedance and load capacitance on high-speed PCB designs, reducing reflections and harmonic distortion.
Timing Performance in Industrial Networks
Jitter and Phase Margin Across Temperature
In networking baseband processing, sub-100 fs RMS jitter preserves signal integrity at multi-gigabit line rates. Veronica 90 maintains phase margin above specification across extended temperature ranges, which is critical for industrial edge nodes exposed to harsh environments.
Holdover and Recovery During Packet Burst
Internal loop filter and reference switching logic enable seamless holdover when external clocks degrade. During cyclic burst traffic, the oscillator recovers frequency within microseconds, avoiding packet loss and protocol timeouts in control plane blocks.
Mechanical Layout and Power Integrity
Package Pinout and Grounding Strategy
Exposed ground planes beneath the die reduce substrate coupling and minimize radiated emissions. Guard rings around sensitive analog nodes comply with IEC 61000-4-3 for industrial sites where transient fields are present.
Decoupling and Power Sequencing
Low equivalent series inductance capacitors near the power pins limit voltage droop during high-current transients. Sequencing controllers should ramp supplies slowly to avoid output spikes and reduce inrush current stress on downstream drivers.
Compliance and Environmental Limits
RoHS, REACH, and Reliability Testing
Material declarations satisfy RoHS directives, and halogen-free solder mask options are available for high-reliability boards. Reliability burn-in at rated temperature validates carrier mean time between failures figures for long-life infrastructure projects.
ESD and Latchup Immunity
Human body model and charged device model tests exceed IEC 61000-4-2 levels used in field equipment cabinets. CMOS substrate clamps and deep well isolation prevent latchup during ESD events on connector interfaces.
FAQ
Reader questions
Can Veronica 90 maintain 90 MHz within 2 ppm from -40 to 125 C in outdoor enclosures?
Extended temperature operation can hold within 5 ppm under worst case, and many designs meet 2 ppm across the industrial range using local thermal shielding and controlled airflow.
What supply ripple rejection does Veronica 90 offer on the analog supply pins?
On-chip regulators and low dropout designs provide better than 60 dB rejection at 100 Hz to 100 kHz, minimizing noise injection from noisy bus converters and switching supplies.
How does phase noise impact 5G mid-band radios when using Veronica 90 as a reference?
-155 dBc/Hz phase noise at 1 kHz offset improves adjacent channel leakage ratio and error vector magnitude, enabling higher order modulations without additional front-end filtering.
Is zero-drift compensation available for Veronica 90 in precision time servers?
Optional digitally assisted calibration can correct aging and mechanical stress drift, reducing long term frequency error below 1 ppb per month in disciplined time servers and GNSS disciplining applications.